The Burnside frame was made to be a rugged and nimble street-freestyle rig.  A true-x toilet tank format allows the overall length to be as short as possible preventing front and rear ground contact and positioning the center of gravity closer to the center mass. Standoffs available in black, grey or pink.

Newest version includes upgraded 5.5mm arms and 2.5mm top plate. 

Specifications

• Format: True-X Toilet Tank Style
• Motor to Motor: 230mm
• Frame Weight: 125g (No Stack Hardware)
• Arm Thickness: 5.5mm
• Top Plate Thickness: 2.5mm
• Bottom/Mid Plate Thickness: 2.5mm
• Cam Plate Width: 20mm (Flip Cam plates backwards for deeper hole pattern for RC18 lens, cam plates must be put in upside down and used with 30mm hourglass front standoffs to accommodate DJI 03 camera)
• Mid stack pattern: Mid - 30.5mm x 30.5mm (Not all ESC's will fit)
• Rear stack Pattern: 20mm x 20mm (Vista/Walksnail) DJI 03 fits
• Max Stack Height: approx 20mm, standoff height is 23mm
  
• Motor Mount: 16mm x 16mm 

Included Parts

• Top Plate
• Bottom Plate
• Mid Plate w/press nuts
• Camera Plates
• 4 Arms
• 4 Injection molded skids
• Frame hardware and screws
• Choice of standoff colors
• Main stack hardware

Recommended Components

• Lipo Strap: TBS Swagger 240mm for 6s 1100mah pack / 4s 1300mah pack
• FPV Camera: Caddx Vista 20mm Camera
• ESC: Foxeer Reaper, Tmotor F55 Pro, CL Racing 45amp, (or like formats avoiding battery tabs from being to wide.)
• For more information on parts compatibility, see the manual below.
• 2306 or 2207 size motors.

All 3d print files available here:  https://www.thingiverse.com/thing:5328440

Build Manual PDF

Burnside Manual v1.1